Does The 2003 Outback Have A Cabin Filter

Download Article

Download Commodity

The Subaru Outback air filtration organisation is designed to ameliorate the quality of air in the cabin of the automobile. Replacing the filter will as well let the air from the vents and the A/C to motion more freely throughout the vehicle. It's recommended that you modify your air filter once a year, or every 7,500 miles (12,100 km).^[ane] The following steps outline how to change the filter, and only a few unproblematic tools are needed for the project.

Steps Download Article

1

Remove the right dashboard panel next to the glove box. Remove all contents in the glove box. Locate the dashboard panel at the right side of the glove box and pull information technology out. Use a flat-head screwdriver to pry the panel from the nuance.
2

Accept out the glove box. Disconnect the stopper string of the glove box, which is found on the right side. Push in the sides of the glove box to release the knock pins. Unscrew the screws that hold in the knock pins one/4 of an inch with a Phillips screwdriver. Remove the pins.^[ii]

Advertizing
3

Remove the glove box stops from the track grooves. Carefully put pressure on both sides of the glove box, 1 side at a time, to loosen the stops from the tracks. Allow the glove box drop out of the manner.^[three]
4

Detach the possessor'south manual shelf. In the Subaru Outback and Legacy models, at that place is a raised shelf in the glove box that holds the owner's manual. Locate the owner's manual shelf on the correct side of the console. Use a Phillips screwdriver to unscrew the 3 screws attaching information technology to the console. Remove the shelf.
five

Remove the filter housing bracket. Unscrew the 3 screws on the filter housing bracket using a Phillips screwdriver. Remove the subclass. Remove the insulation on the bracket comprehend.
half dozen

Extract the old filter. Use pressure to the four clips on the front of the filter housing tray. Pull out the tray. Remove the old filter from the tray.^[4]
seven

Insert the Subaru replacement air filter. Identify the new filter in the tray. Ensure that the arrow for filter direction that is indicated on the new filter is facing the correct direction.^[v]
8

Place the tray dorsum in the filter housing. Make sure the tray clips are in identify.
9

Reinstall the glove box. Reconnect the assembly of stops and runway grooves. Reinstall the panel side console and the glove box installation screws. Elevator the glove box up and replace the knock pins. Restore the dashboard console.^[6]

Advertising